TM-9-2350-277-20-1

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 6

TM-9-2350-277-20-1 - Page 644 of 855

TM 9-2350-277-20-1

MSD/ICETEST72STARTERCURRENT(FIRSTPEAK)

012900

THIS WORK PACKAGE COVERS:

Test (page 0129 00-1).

INITIAL SETUP:

Maintenance Level

Unit

Personnel Required

Unit Mech 63T10

Equipment Condition

Engine stopped (TM 9-2350-277-10)

Vehicle blocked (TM 9-2350-277-10)

MSD/ICEhookeduptoDCA6(WP011700)

TEST

1.

Select

ICE Testing

from programs menu.

2.

Select button

1. Serial ICE

3.

Select button

1. ICE Tests

NOTE

All M113A3 variants are covered under

M113A3-M1068A3 APC

vehicle selection

4.

Select

M113A3-M1068A3 APC

, then select the

OK

button.

NOTE

Once MSD/ICE hook up screen

OK

button is selected, the MSD/ICE will perform a self test.

If self test fails, notify supervisor.

5.

Select

OK

button on the MSD/ICE hook up screen to proceed.

6.

Select

OK

button after successful self test.

7.

Follow on screen preparation for DCA offsets tests. Select

OK

button.

8.

Use Tab and Shift-Tab to move from one list box to another.

9.

Use spacebar to select/deselect the test.

10. Select

72 DCA 1stPeak

from

SPECIAL TESTS

list box. Select

Run Test(s)

button.

11. Crank engine for one second and note reading displayed on MSD.

a.

If MSD reads between 900 and 1540, test passes.

b.

If error message appears, see TM 9-6625-2301-14&P.

12. Return to troubleshooting.

0129 00-1/2 blank

Change 5