TM 9-2350-277-20-2
REPLACE AIR BOX HEATER IGNITION WIRE
0204 00
THIS WORK PACKAGE COVERS:
Removal (page 0204 00-1).
Installation (page 0204 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Tie strap (2)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Power plant upper and lower rear access panels and
support removed (see your -10)
REMOVAL
1.
Disconnect ignition wire (1) from air box igniter (2).
2.
Remove two tie straps (3) from air pump wiring harness (4). Discard tie straps.
3.
Disconnect other end of ignition wire (1) from ignition unit (5).
4.
Loosen nut (6) and rotate solenoid receptacle (7) toward rear of carrier. Remove ignition wire (1).
0204 00-1