TM 9-2350-277-20-2
REPLACE PRIMARY AND SECONDARY FUEL FILTER ELEMENTS — Continued
0202 00
CAUTION
The two tees (16) and (21) and elbow (15) are made of brass and will damage easily if, during removal,
the switch, transmitter, or hose are removed.
Put a bolt or switch back in the tee when turning
it. This will prevent it from collapsing.
12. If required to gain access, remove two inlet tees (16) and (21) from secondary fuel filter head (11).
13. Hold filter canister (22) and remove screw (8) and washer (9) securing canister to fuel filter head (11).
14. Remove filter canister (22), gasket (12), and filter element (24) from filter head (11). Discard filter element. Wipe
canister (22) clean. Use rags. Discard filter, gasket, and rags per local SOP.
SECONDARY
FILTER
PRIMARY
FILTER
0202 00-5
Change 2