TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 442 of 783
TM 9-2350-277-20-2
REPLACE PRIMARY AND SECONDARY FUEL FILTERS AND BRACKET — Continued
0203 00
REMOVAL
NOTE
New and Old Configuration refers to Variable Speed Fan Drive Configuration.
Install covers on disconnected fuel lines, tubes, valves, and components during maintenance.
Use tape, cloth, cardboard, or any appropriate material to prevent damage to components or
accidental fuel spills.
1.
Remove hoses (1) from elbows (2).
(New Configuration is a tee with adapter (7) instead of elbow (2).)
2.
Remove hoses (6) and (3) from two adapaters (5) and (4).
3.
Remove screw (5), two washers (3), and clamp (4) from bracket (2).
4.
Remove four screws (6), washers (7), locknuts (1), and bracket (2) from engine. Discard locknuts.
0203 00-2
Change 2
Back to Top
