TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

  TM-9-2350-277-20-2 - Page 479 of 783

TM 9-2350-277-20-2
REPLACE GLOW PLUG CONTROLLER MOUNTING BRACKET
0212 00
THIS WORK PACKAGE COVERS:
Removal (page 0212 00-1).
Installation (page 0212 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Torque wrench (WP 0926 00, Item 81)
Torque wrench (WP 0926 00, Item 82)
Materials/Parts
Lockwasher (4)
Lockwasher (2)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Rear power plant access panel removed (see your -10)
Battery ground strap disconnected (WP 0337 00),
(WP 0338 00), or (WP 0339 00)
REMOVAL
1.
Remove two bolts (1), lockwashers (2), nuts (3), four washers (4), and glow plug controller (5) from mounting bracket
(6) on front of engine. Discard lockwashers.
2.
Remove two short screws (7), lockwashers (8), and washers (9) from front of mounting bracket (6).
3.
Remove two long screws (10), lockwashers (11), washers (12), spacers (13), and mounting bracket (6) from engine.
Discard lockwashers.
0212 00-1


Back to Top