TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 480 of 783
TM 9-2350-277-20-2
REPLACE GLOW PLUG CONTROLLER MOUNTING BRACKET — Continued
0212 00
INSTALLATION
1.
Install mounting bracket (1), two spacers (2), washers (3), new lockwashers (4), and long screws (5) on front of engine.
TIGHTEN SCREWS TO 192-240 LB-IN (22-27 N
m) TORQUE. USE TORQUE WRENCH.
2.
Install two washers (6), new lockwashers (7), and short screws (8) into front of mounting bracket (1). TIGHTEN
SCREWS TO 46-50 LB-FT (62-68 N
m) TORQUE. USE TORQUE WRENCH.
3.
Install glow plug controller (9), four washers (10), two new lockwashers (11), bolts (12), and nuts (13) on mounting
bracket (1).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
2.
Install engine access panel (see your -10).
END OF TASK
0212 00-2
Back to Top
