TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 499 of 783
TM 9-2350-277-20-2
REPLACE UPPER ACCELERATOR PEDAL ASSEMBLY — Continued
0216 00
2.
Remove locknut (1), washer (2) and screw (3) securing drag link (4) to fuel control shaft plate (5). Discard locknut.
3.
Loosen locknut (6) on throttle control arm (7). Remove throttle control arm (7) with drag link (4) from shaft (8). Remove
locknut (6), washer (9) and screw (10) from throttle control arm. Discard locknut. Have helper assist.
4.
Remove cotter pin (11), and washer (12) securing hand throttle pin (13) to throttle control arm (7). Remove hand throttle
pin (13) with cable (14). Discard cotter pin.
5.
Remove locknut (15), two washers (16) and screw (17) securing drag link (4) to throttle control arm (7). Discard locknut.
6.
Remove cotter pin (18), washer (19), pin (20), and link (21) from lower accelerator pedal (22). Discard cotter pin.
7.
Remove four screws (23) and washers (24) securing pedal guide (25) to bulkhead.
021600-3
Change 5
Back to Top
