TM 9-2350-277-20-2
REPLACE FUEL CONTROL SHAFT AND LINKAGE — Continued
0217 00
1.
Remove spring (1) from bulkhead.
2.
Remove locknut (2), two washers (3) and screw (4) securing drag link (5) to throttle control arm (6). Discard locknut.
3.
Remove locknut (7), washer (8) and screw (9) securing drag link (5) to shaft (10). Remove drag link.
4.
Remove locknut (11), washer (12) and screw (13) securing linkage (14) to arm (15).
0217 00-2
Change 5