TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 512 of 783

TM 9-2350-277-20-2

REPLACE THROTTLE VALVE (TV) MODULATOR AND LEVER — Continued

0218 00

INSTALLATION

NOTE

Apply a light coat of sealing compound to male pipe threads before installation. Do not coat

leading thread.

1.

Install elbow (6) in throttle valve pressure test port on transmission (4) in the 1:00 to 2:00 o’clock position.

2.

Install pipe plug (5) in pipe elbow (6).

CAUTION

If preformed packing comes with throttle valve modulator, discard packing. The packing is not

required because there is an oil seal already installed inside the transmission, and the packing

does not allow for proper fit of the modulator into the transmission.

NOTE

Make sure modulator is in idle position before installing modulator on transmission.

3.

Install modulator (3) in transmission (4). Secure with retainer (2) and new self-locking bolt (1).

0218 00-4

Change 5