TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 469 of 941

TM 9-2350-277-20-3

REPLACE TRANSMISSION WIRING HARNESS — Continued

0360 00

INSPECT AND REPAIR

1.

Check leads for continuity. Replace bad leads.

2.

Check connectors and terminals. Repair bad connectors or terminals (WP 0382 00).

INSTALLATION

1.

Place new wiring harness (1) on transmission.

2.

Connect circuit 323 connector (2) to differential pressure switch (3).

3.

Connect wiring harness connector (4) to transmission connector (5).

4.

Connect circuit 366 lead (6) to transmission low oil pressure switch (7).

5.

Connect transmission wiring harness connector (8) to bulkhead connector (9).

6.

Install wiring harness (1) in four clamps (10), and secure to brackets with four screws (11), eight washers (12), and

four new locknuts (13).

FOLLOW-THROUGH STEPS

1.

Close power plant access door. See TM 9-2350-277-10.

END OF TASK

0360 00-2

Change 5