REPLACE TRANSMISSION CONTROLLER WIRING HARNESS — Continued
NOTE
Support instrument panel on two struts during installation of panel.
11. Install two ground leads (4) and (5), washer (3), screw (1), and new locknut (2) on strut (6).
12. Install instrument panel (6) and ground lead (7) on support (8). Secure with new lockwasher (9), two washers (10), and
screws (11).
13. Install instrument panel (6) on two struts (12). Secure with two new locknuts (13), mounts (14) and (15), washers
(16), and screws (17).
0361 00-8
Change 5
0361 00
TM 9-2350-277-20-3