TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 485 of 941

TM 9-2350-277-20-3

NOTE

The M58 does not use connector, bushing, and hardware only adhesive sealant on wiring

harness in hull opening. To remove leads on M58, carefully cut adhesive sealant and pull

harness into carrier.

10. Loosen nut (1) that secures circuits 23 (2), 24 (3), and 31 (4) leads with rubber bushing (5) in connector (6). Separate

nut, washer (7), and rubber bushing from connector. (All except M58).

11. Remove connector (6) and harness from top of hull. Pull harness into carrier.

0362 00-6

Change 2

0362 00

REPLACE REAR MAIN WIRING HARNESS (M113A3,

M1059A3, AND

M58) — Continued