TM 9-2350-277-20-3
12. Remove screw (8), nut (9), and clamp (10) that secures harness (11) on bilge pump tube clamp (12). Remove harness
from bilge pump tube clamp.
13. Disconnect circuit 451 lead (13) from rear bilge pump (14).
14. Disconnect circuit 21 (15), 22 (16), 23 (17), and 24 leads (18) from trailer harness.
15. Remove two screws (19), clamps (20), washers (21), harness (22), and circuit 90 lead (23) from two weldnuts.
0362 00-7
REPLACE REAR MAIN WIRING HARNESS (M113A3,
M1059A3, AND
M58) — Continued
0362 00
Change 2