TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 487 of 941

TM 9-2350-277-20-3

16. Remove screw (1), lockwasher (2), and clamp (3) that secure bilge pump tube clamp (4) and wiring harness (5) on

weldnut. Discard lockwasher.

17. Remove two screws (6), nuts (7), and clamp (8) from ﬂoor transverse beam (9).

NOTE

Only the M58

and M1059A3 have the lockwasher.

18. Remove screw (10), nut (11), and clamp (8) from circuit 451 lead (12).

19. Remove three screws (13), lockwashers (14), clamps (15), and circuit 451 lead (12) from weldnut. Discard lockwashers.

0362 00-8

Change 2

0362 00

REPLACE REAR MAIN WIRING HARNESS (M113A3,

M1059A3, AND

M58) — Continued