REPLACE TRANSMISSION CONTROLLER WIRING HARNESS — Continued
3.
Remove screw (1), locknut (2), washer (3), and two ground leads (4) and (5) from strut (6). Discard locknut.
NOTE
Support instrument panel on two struts to gain access to rear of panel.
4.
Disconnect circuit 40 lead (6) from instrument panel wiring harness lead (7).
5.
Disconnect circuit 27P lead (8) from instrument panel wiring harness lead (9).
6.
Disconnect circuit 323 lead (10) from transmission filter clogged indicator (11) on instrument panel.
0361 00-2
Change 5
0361 00
TM 9-2350-277-20-3