TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 473 of 941

REPLACE TRANSMISSION CONTROLLER WIRING HARNESS — Continued

10. Remove three screws (1), lockwashers (2), clamps (3), and wiring harness (4) from driver’s front hull. Discard

lockwashers.

11. Disconnect wiring harness connector (6) from transmission control (5).

12. Disconnect transmission wiring harness (7) from bulkhead connector located inside power plant compartment.

13. Remove four screws (8), locknuts (9), and connector (10) from driver’s compartment bulkhead. Have helper assist.

Discard locknuts.

14. Remove transmission controller wiring harness (11).

INSPECT AND REPAIR

1.

Check harness continuity. Replace bad harness.

2.

Check leads. Replace frayed, cracked, or broken leads (WP 0382 00).

3.

Check connectors. Replace cracked or broken connectors (WP 0382 00).

0361 00-4

Change 5

0361 00

TM 9-2350-277-20-3