TM 9-2350-277-20-4
REPLACE POWER PLANT DOOR COMBAT LOCK — Continued
0473 00
INSTALLATION
1.
(H) Install bolt (1) in place from outside carrier through access to power plant compartment.
2.
From inside driver’s compartment, install spring (2) and handle (3) on bolt (1). Secure with new drive pin (4).
3.
Connect four wiring harnesses (5) to bulkhead in driver’s compartment.
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00 or WP 0338 00).
2.
Close power plant access door. See TM 9-2350-277-10.
END OF TASK
0473 00-3/4 blank
Change 5