TM 9-2350-277-20-4
REPLACE TURBINE ACCESS DOOR (M58 ONLY) — Continued
0485 00
REMOVAL
NOTE
The hinge pins are not removed from the hinge halves for this task.
1.
Remove four screws (1), washers (2), and two hinge halves (3) from turbine access door (4).
2.
Remove eight screws (5), washers (6), and turbine access door (4) from carrier.
3.
Remove strap assembly (7) from turbine access door (4).
INSTALLATION
1.
Install strap assembly (7) on turbine access door (4).
2.
Install turbine access door (4), eight washers (6), and screws (5) on carrier.
0485 00-2
Change 1