TM 9-2350-277-20-4
REPLACE COMPARTMENT FLOOR PLATES (M1068A3 ONLY) — Continued
0544 00
3.
Remove two front floor plates (4) and (9) and rear floor plate (8) from hull crossmembers.
4.
If necessary, remove two pads (10) and (14), rubber strips (11), six seals (12), and seal (13) from crossmembers by
scraping.
5.
If necessary, remove cover plate (7), two hook velcro strips (6), and two loop velcro strips (5). Discard velcro strips.
NOTE
Perform Step 6 only if vehicle has safe installed.
6.
Remove four screws (3), self-locking nuts (15), eight washers (2), and safe adapter plate (1) from floor plate (4). Discard
self-locking nuts.
0544 00-2
Change 4