TM-9-2350-277-20-4
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6
TM-9-2350-277-20-4 - Page 94 of 861
TM 9--2350--277--20--4
0426 01--3
RE P L ACE RO AD W HE E L (T150) -- Continued
0426 01
INSTALLATION
1.
Lift track assembly with bar. Place two road wheels (1) on road wheel arm (2). Secure loosely with eight washers (3) and
new locknuts (4).
2.
Unblock carrier (see your --10).
WARNING
You can be hurt if road wheel lifter slips while road arm is being lowered. Stand clear.
3.
Start engine (see your --10). Place range selector in RANGE 1. Slowly drive carrier forward off lifter (5). Remove lifter.
WARNING
Failure to set the parking brake and block the road wheels can allow the carrier to move and
could result in injury or death. Always set the parking brake and block road wheels before
working on the carrier.
4.
Remove two T--nuts (6), screws (7), flat washers (8), and retainer (9) from lifter (5) and remove road wheel lifter assembly
from track.
5.
Block carrier (see your--10).
6.
TIGHTEN EIGHT NUTS (4) TO 150--170 LB--FT (203--230 N
∙
m) TORQUE.
Change 2
Back to Top
