TM-9-2350-277-20-5
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6
TM-9-2350-277-20-5 - Page 225 of 1047
TM 9-2350-277-20-5
SERVICE PERSONNEL HEATER FUEL PUMP — Continued
0681 00
DISASSEMBLY
NOTE
There are two types of fuel pump. For BENDIX/FACET type, do Assembly Step 1, Cleaning
Step 1, and Disassembly Step 2. For WALBRO type, do Assembly Step 2, Cleaning Step 1, and
Disassembly Step 1.
1.
Remove cover (1) , gasket (2) , and strainer element (3) from fuel pump housing (4) . Discard gasket.
2.
Remove three screws (5) , cover (6) , gasket (7) , and filter element (8) from fuel pump housing (9) . Discard gasket.
CLEANING
1.
Clean element with cleaning compound.
ASSEMBLY
1.
Install clean filter element (8) , new gasket (7) , and cover (6) on pump housing (9) . Secure with three screws (5) .
2.
Install clean strainer element (3) , new gasket (2) , and cover (1) on pump housing (4) .
FOLLOW-THROUGH STEPS
1.
Install personnel heater fuel pump (WP 0695 00), (WP 0696 00), or (WP 0697 00).
END OF TASK
0681 00-2
Back to Top
