TM 9-2350-277-20-5
REPLACE HEATER AIR INTAKE AND EXHAUST PIPES (ALL EXCEPT
M1064A3) — Continued
0682 00
NOTE
Perform Step 2 on all vehicles except M1068A3 and M577A3. Perform Step 3 on M1068A3
and M577A3.
2.
Remove two nuts (7), U-bolt (5), and clamp (6) from exhaust pipe (10).
3.
Remove clamp (9) from exhaust pipe (10).
4.
Remove six screws (2), intake elbow (1), exhaust elbow (3), and two elbow gaskets (4) from carrier top deck. Discard
gaskets.
5.
Remove four screws (15), locknuts (8), two bulkhead gaskets (11), and exhaust pipes (10), (13), and (14) from power
plant bulkhead. Discard gaskets and locknuts.
6.
If necessary, remove grommet (12) from power plant bulkhead. Discard grommet.
0682 00-2
Change 4