TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 412 of 487

TM 9-2350-277-20-6

REPLACE EXTERNAL CABLE TUBE — Continued

0905 00

INSTALLATION

1.

Install new sleeve (10), two nuts (1) and (2), and adapter (3) on new tube (11).

NOTE

Make sure nuts, sleeves, and adapter are installed in the proper order and facing the right

direction as in illustration.

2.

Install adapter (7) in hull plate. Secure tube (11) to adapter with sleeve (8) and nut (6).

3.

Install adapter (3) in support bracket (4). Secure with nut (1) and jam nut (2).

4.

Install tube (11) on adapter (3). Secure with ﬂared sleeve (10) and nut (9).

5.

Slide tube (11) through hole in hull plate.

6.

Install new adapter (12) on control valve (13).

7.

Install control valve (13) on ﬁre extinguisher cylinder (14). Secure with captive nut (15).

8.

Install new nut (16) and new sleeve (17) on tube (11).

9.

Route cable (5) through tube (11). Tighten nut (16) on adapter (12).

FOLLOW-THROUGH STEPS

1.

Install external handle and insert (WP 0904 00).

2.

Install external handle shield (WP 0901 00), (WP 0902 00), or (WP 0903 00).

END OF TASK

0905 00-5/6 blank

Change 1