TM 9-2350-277-34
REPLACE BURNER PACKING AND GASKET — Continued
0082 00
INSTALLATION
1.
Install new preformed packing (9) and new gasket (10) in groove of burner (4).
2.
Place burner (4) in heater (8). Secure with four nuts (5), bolts (6), and clamps (7).
3.
Install ground strap (3) on burner (4). Secure with screw (1) and washer (2).
FOLLOW-THROUGH STEPS
1.
Install fixed resistor (WP 0081 00).
2.
Install fuel control valve (WP 0078 00).
3.
Install engine coolant heater in carrier (see your -20).
END OF TASK
0082 00-2