TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 583 of 871

TM 9-2350-277-34

REPLACE BLOWER MOTOR — Continued

0084 00

6.

Remove seven screws (10), speed nuts (11), and cover (12) from blower plate (13).

7.

Loosen set screw (14) and remove fan vane (15) from motor (16).

8.

Remove three screws (17), spacers (18), grommets (19), and motor (16) from blower plate (13).

INSTALLATION

1.

Install motor (16) in blower plate (13). Secure with three screws (17), spacers (18), and grommets (19).

2.

Place fan vane (15) ﬂush with end of motor shaft. Secure with set screw (14).

3.

Install cover (12) on blower plate (13). Secure with seven screws (10) and speed nuts (11). Turn fan vane (15) through

combustion tube opening to make sure fan vane is clear.

0084 00-2