TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 582 of 871

TM 9-2350-277-34

REPLACE BLOWER MOTOR

0084 00

THIS WORK PACKAGE COVERS:

Removal (page 0084 00-1).

Installation (page 0084 00-2).

INITIAL SETUP:

Maintenance Level

Direct Support

Tools and Special Tools

Automotive Fuel and Electrical System Repair Tool Kit

(WP 0120 00, Item 59)

Metric Wrench Kit (WP 0120 00, Item 77)

Personnel Required

Fuel and Elec Sys Rep 63G10

References

See your -20

Equipment Condition

Engine coolant heater removed from

carrier (see your -20)

REMOVAL

1.

Remove four screws (19) and guard (18) from coolant heater (12).

2.

Remove nut (17) and combustion tube assembly (16) from coolant heater (12) and blower assembly (11).

3.

Disconnect blower assembly lead (14) from terminal strap (15) terminal No. 6.

4.

Scribe a line on blower assembly (11) and on coolant heater (12) for proper alignment.

5.

Loosen four nuts (13) and turn blower assembly (11) to left and remove blower assembly from coolant heater (12).

0084 00-1