TM-9-2350-277-34
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-277-34 - Page 591 of 871
TM 9-2350-277-34
INSTALL CAPSTAN KIT (M1059A3 ONLY) — Continued
0086 00
0086 00-2
6.
Place two adapters (3) on two sprockets (2).
7.
Secure adapters (3) to sprockets (2) with 20 screws (4). Tighten screws to 110-115 lb-ft (149-156 N
m) torque.
Change 3
NOTE
Two types of screws are provided in capstan kit. One type of screw is for counterbore holes in
sprocket.Theothertypeofscrewisforholeswithoutcounterboreconstruction.Twentyofeach
type of screw are provided. Use as applicable.
5. Remove 10 screws (1) from left sprocket (2) and 10 screws from right sprocket.
Back to Top
