TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 626 of 871

TM 9-2350-277-34

REPLACE POWER CONTROL ENCLOSURE POWER SUPPLIES

(M1068A3 ONLY) — Continued

0090 00

NOTE

For new model power supplies, do Steps 3 - 16 and Steps 28 - 30.

For old model power supplies, go to Step 17.

NOTE

Both power supplies shall be of the same vendor part number, do not mix old model power

supply, they will not communicate together or operate properly. Replace power supplies with

same model power supply. The old models are not available anymore, save good old model to

replace sets that have one failure. When replacing a bad old model power supply, replace both

power supplies with the new model power supply; see TM 9-2350-277-24P.

3.

Install power supply (2) into power control enclosure. Have helper assist.

4.

Install power supply (1) into power control enclosure. Have helper assist.

009000-7

Change 5