TM 9-2350-277-34
REPLACE POWER CONTROL ENCLOSURE POWER SUPPLIES
(M1068A3 ONLY) — Continued
0090 00
5.
Install circuits 31E (2) and 31D (3) leads with two screws (5) and washers (4) to positive terminals of power supply (1).
6.
Install circuits 31C (7) and 31D (3) leads with two screws (5) and washers (4) to positive terminals of power supply (9).
7.
Install circuit 32D (6) lead with screw (5) and washer (4) to negative terminal of power supply (1).
8.
Install circuits 32D (6) and 32E (8) leads with two screws (5) and washers (4) to negative terminals of power supply (9).
9.
Connect jumper cable (2) to power supply connectors (1) and (3).
0090 00-8
Change 5