TM-9-2350-311-10
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; OPERATOR’S MANUAL
NOVEMBER 1994
TM-9-2350-311-10 - Page 430 of 775
TM 9-2350-311–10
3-5
HULL MAINTENANCE PROCEDURES — CONTINUED
3-5.6
Maintenance of T-136 Track — Continued
e.
Connecting Track — Continued
6
Position vehicle so connecting point is positioned on idler wheel (13) where the track shoes (4) are bent
at approximately a 12° angle.
Do not tighten bolts when track shoes form a straight line.
7
Install retaining wedges (2) and bolts (1).
8
Notify unit maintenance to torque bolts (1) to 90-100 Ib-ft (122–136 N·m). Torque again after 50 miles
(80 km).
9
Check track tension and adjust if necessary (para 3-5.5).
3-30
Back to Top
