TM 9-2350-311-20-1
Do not perform more than two compression unbalance
tests in a row to prevent discharge of batteries.
NOT E
Engine must beat normal operating
temperature before performing
compression unbalance test.
- Shut off fuel supply so engine will not start (TM 9-2350-311-10).
- Crank engine with fuel inhibited for 5 seconds to clear fuel from cylinders.
- Set TEST SELECT switches to 14, press and release TEST button.
- Wait for prompting message GO to appear.
Refer to TM 9-4910-571-12&P
for fault isolation.
Figure 3, Sheet 35 of 36
I-61
CAUTION
Go to step 6,
Figure 3 ,
sheet 36 .