TM 9-2350-311-20-1
- Remove red-striped pressure transducer, TK item 22.
- Refer to TM 9-2350-311-10 for proper operation of
engine fuel shutoff.
- Check for restricted air intake.
- If engine does not start and weather is cold, check
cold start devices (TM 9-2350-311-10).
- If still no start, notify support maintenance.
After completing repair, rerun GO CHAIN tests to
verify problem has been fixed and that no other
problems exist. Start at GO 2 (Figure 2, sheet 8) if
VTM is already connected. Otherwise start at GO 1
(Figure 2, sheet 1).
Figure 3, Sheet 25 of 36
I-51
NOTE
Go to Figure 3,
sheet 26.