TM-9-2350-311-20-1
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS
AUGUST 1994
TM-9-2350-311-20-1 - Page 61 of 1275
2-13.2 Typical Female-Type Panel Mounting Receptacle
2-13.2.1 Disassembly
a. Drive socket contact out through rear of insert with pin extractor.
b. Unsolder cable leads from solder wells on socket contacts.
c. Slide insert out through rear of shell.
2-13.2.2 Assembly
a.
b.
c.
d.
Strip cable insulation equal to depth of solder wells of socket contacts.
Insert cable leads into solder wells of socket contacts and solder using resin core solder.
Push insert into shell from rear until seated. Groove in insert must be alined with guide in shell to ensure proper
fit.
Push socket contacts into insert from rear until seated.
2-13.3 Typical Male-Type Panel Mounting Receptacle
2-13.3.1 Disassembly
a.
b.
c.
d.
Drive pin contacts out through rear of insert with pin extractor.
Unsolder cable leads from solder wells on pin contacts.
Slide insert out through rear of shell.
Push pin contacts into insert from rear until seated.
2-13
TM 9-2350-311-20-1
Back to Top
