TM 9-2350-311-20-1
8-20 ACCESSORY CONTROL BOX
This task covers:
a. Removal
b. Disassembly/Repair
c. Assembly
d. Installation
General mechanic’s tool kit (item 64, Appx H)
Rivet gun (item 25, A
PPX
H)
Soldering gun (item 26, Ap
PX
H)
MateriaIs/Parts
Gasket (item 150, Appx G)
Lockwasher (item 72, Appx G)
Lockwashers (12) (item 86, A
PPX
G)
Lockwashers (3) (item 87, Appx G)
Lockwashers (4) (item 93, Appx G)
Lockwashers (12) (item 94, Appx G)
Rivet (item 20, Appx G)
Rosin core solder (item 58, Appx D)
Silicone compound (item 33, Appx D)
Personnel Required
Two
Equipment Conditions
Batteries disconnected (para 8-28)
a. Removal
1 Disconnect three electrical connectors (1).
2 Remove four screws (2), four flat washers (3), four lockwashers (4), and four nuts (5) while supporting
accessory control box (6). Discard lockwashers.
3 Remove four screws (7), four washers (8), and two mounting brackets (9).
8-51