TM-9-2350-311-20-2
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS
DECEMBER 1993
TM-9-2350-311-20-2 - Page 76 of 828
TM 9–2350–311–20–2
Change 2
2–15
2–7
DECALS, LABELS, AND INSTRUCTION SIGNS
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Artillery and turret mechanic’s tool kit
(SC 5180–95–CL–A12)
Materials/Parts
Decal
Cleaning compound (item 9.1, Appx D)
Instruction sign
Label
a.
Removal
NOTE
•
Only replace decals, labels, and instruction plates which are damaged or unreadable.
•
Perform step 1 for self-adhesive decals, labels, and instruction plates.
•
Perform step 2 for plates with hardware.
1
Scrape label from mounting surface. Discard label.
2
Remove all screws and washers securing instruction plate to mounting surface. Retain screws and washers for
assembly.
b.
Installation
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
NOTE
•
Perform steps 1 through 3 for self-adhesive decals, labels, and instruction plates.
•
Perform step 4 for instruction plates with hardware.
1
Clean mounting surface using cleaning compound.
2
Remove paper backing from new label and position in place on mounting surface.
3
Press label firmly to remove air bubbles from under label.
4
Secure instruction plates to mounting surface using screws and washers retained from removal.
Back to Top
