TM-9-2350-311-34-1
HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-1 - Page 129 of 352
Tools
Equipment Conditions
Materials/Parts
INITIAL SETUP
Personnel Required
CAUTION
TM 9-2350-311-34-1
SECTION Il. RADIATOR SHROUD AND VANEAXIAL COOLING FAN ASSEMBLY
6-3 VANEAXIAL COOLING FAN ASSEMBLY AND SHROUD
This task covers:
a. Separation of Vaneaxial Cooling Fan Assembly from Shroud
b. Separation of Vaneaxial Cooling Fans from Mount
c. Assembly of Vaneaxial Cooling Fans to Mount
d. Assembly of Vaneaxial Cooling Fan Assembly to Shroud
General mechanic’s tool kit (item 14, Appx C)
Two
Lockwashers (28) (item 35, A
PPX
F)
Radiator and shroud removed with fans attached
Lockwashers (8) (item 37, Appx F)
(TM 9-2350-311-20-1)
Sealing compound (item 20, A
PPX
B)
a. Separation of Vaneaxial Cooling Fan Assembly from Shroud
Support fan assembly and shroud while screws are being removed. Do not damage,
destroy, or discard generator mounting preformed packing in shroud.
1 Remove 28 screws (1), 28 Iockwasher (2), and 28 washers
2 Separate cooling fans (4) and mount (5) from shroud (6).
(3). Discard Iockwasher.
6-11
Back to Top
