TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

TM-9-2510-247-13-P - Page 214 of 522

TM 9-2510-247-13&P

0041 00

REMOVAL- Continued

Figure 75.

Receptacle Box

INSTALLATION

1. Insert wire cable (1) into back of receptacle (9) and attach by soldering cable end to

receptacle. After wire end has cooled, pull rubber boot (11) into place over back of receptacle

(9).

2. Position receptacle (9) on junction box (10) and secure with two screws (7), flatwashers (8),

one flatwasher (5), ground cable (6), two new lockwashers (4), and nuts (3).

3. Connect the receptacle (9) to terminal cable (1) at terminal (2).

4. Connect fifth wheel towing device battery cables (WP 0050).

5. Using a multimeter, switch the 12/24 volt selector switch to 24 volts and check for 24 volt

reading at center pin of receptacle.

Follow-on Tasks:

None

0041 00-2

END OF WORK PACKAGE