TM 9-2510-247-13&P
0042 00
INSTALLATION
NOTE
There are two 12-volt receptacles, one on 12/24 junction box and one on
electrical control box. Both are installed the same way.
1.
Install wires into receptacle (5) and tighten screws (6).
2.
Position receptacle (5) in place and secure with two screws (1), flatwashers (2), new
lockwashers (3), and nuts (4).
3.
Connect both fifth wheel towing device batteries (WP 0050).
4.
Inspect operation of 12-volt system by performing function check using 12-volt tow light bar.
0042 00-2
Follow-on Tasks:
None
END OF WORK PACKAGE
Figure 76.
Plug Assembly