1. Disconnect remote control harness (1).
2. Disconnect junction box to electrical control box harness (2).
3. Disconnect ground cable (3) from control box (4).
4. Disconnect electrical control box to battery cable (5).
5. Disconnect electrical control box to solenoid cable (6).
6. Disconnect strobe light wires (7).
7. Disconnect hydraulic solenoid valve cable (8).
8. Disconnect worklight cable (9).
9. Disconnect blackout control cable (10).
ALL CABLES/WIRING REMOVED FOR CLARITY.
TM 9-2510-247-13&P
0044 00
REMOVAL- Continued
0044 00-2
NOTE
Figure 78.
Electrical Control Box