TM 9-2510-247-13&P
0046 00
INSTALLATION
1. Install rubber grommet (5) in tool box.
2. Install remote control tether (3) through grommet (5).
3. Position remote control tether through loop clamps (4) and secure.
4. Install rght side electrical bracket . Reference WP 0070.
5. Install remote control connector (1) on electrical control box (2).
0046 00-2
Follow-on Tasks:
• Connect Batteries (WP 0050).
• Perform operational check of all remote control functions.
END OF WORK PACKAGE
Figure 82.
Remote Control Cable Assembly