TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004
TM-9-2510-247-13-P

  TM-9-2510-247-13-P - Page 225 of 522

TM 9-2510-247-13&P
0045 00
SOLENOID ASSEMBLY REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Equipment Conditions
Materials/Parts
•
Fifth Wheel Towing Device in supported coupling
• Washer, lock (3) (ASAB27-1-1950)
configuration or coupled configuration (WP 0002).
• Tag, marker (item 15, WP 0085)
•
Disconnect batteries (WP 0050).
Tools/Test Equipment
General Safety Instructions
Tool Kit, Mechanics General,
Remove all power to towing device prior to
making any repairs on electrical system.
REMOVAL
WARNING
Remove all power to fifth wheel towing device prior to making any repairs
on the electrical system. Failure to comply may result in injury to personnel
or damage to equipment.
NOTE
The following steps are for the removal and installation of the primary and
isolated solenoid assemblies. Adjust maintenance steps as required to
accommodate required maintenance.
1.Disconnect solenoid to hydraulic motor wire (1) from terminal post (2).
2.Disconnect solenoid to battery wire (3) from terminal post (4).
0045 00-1


Back to Top