TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005
TM-9-2520-215-34

  TM-9-2520-215-34 - Page 316 of 508

TM 9--2520--215--34
0062 00--2
TORQUE CONVERTER HOUSING ASSEMBLY REPAIR – CONTINUED
0062 00
DISASSEMBLY – Continued
2. Remove eight bolts (4) retaining converter ground sleeve (3). Position converter housing (5) to rest on bottom.
3. Drive converter ground sleeve (3) forward, out of converter housing (5). Use a soft hammer or mallet.
4. Remove three self--locking bolts (6) and lockplate (7) from each of two idler gear spindles. Discard self--locking
bolts.


Back to Top