TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 306 of 508

TM 9--2520--215--34

0060 00--2

TORQUE CONVERTER LOCKUP CLUTCH ASSEMBLY AND RELATED PARTS

REPAIR – CONTINUED

0060 00

DISASSEMBLY – Continued

3. Remove three locating balls (6), piston release spring (7) and clutch plate (8). Position housing assembly (9),

open end down on disassembly table. Bump one side, then the other against table to dislodge lockup clutch

piston (10). Remove piston (10).

4. After removing lockup clutch plate (8), drive spring pin (1) out of backplate (2). Discard spring pin.

1

2

6

7

8

10

9

5. Remove one--piece gasket (11) from outer groove of lockup clutch piston (10). Discard preformed packing.