TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 299 of 508

TM 9--2520--215--34

INPUT PRESSURE OIL PUMP ASSEMBLY REPAIR -- CONTINUED

0058 00

ASSEMBLY

1. Tap two needle bearings (7) into pump body (8) and two needle bearings (7) into cover assembly (2). Install

dowel pins (9) into cover assembly (2).

2. Lock needle bearings (7) in place with two flat washers (6) and two bolts (5).

3. Install pump internal gear (4) short end first and idler gear (3) in body assembly (8).

4. Place pump cover assembly (2) on body assembly (8). Align dowel pins (9) in cover assembly (2) with holes in

body assembly (8).

5. Install two bolts (1) and torque bolts to 46 to 52 lb--ft (62.4 to 70.5 N

S

m).

7

7

7

7

6

5

1

4

3

8

2

5

6

9

9

NOTE

FOLLOW--ON MAINTENANCE:

Install input pressure pump (WP 0057 00)

END OF WORK PACKAGE

0058 00--3/4 blank