TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 295 of 508
TM 9--2520--215--34
0057 00--3
INPUT PRESSURE OIL PUMP ASSEMBLY REPLACEMENT – CONTINUED
0057 00
INSTALLATION
1. Using two headless guide bolts (8) installed in opposite pump mounting bolt holes, install input pressure pump
assembly (5).
2. Install four pump mounting bolts (7). Torque four pump mounting bolts (7) to 67 to 80 lb--ft (90.9 to 108.5 N
S
m).
Install two gear seats (6). Use oil--soluble grease to retain seats.
Back to Top
