TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 293 of 508

TM 9--2520--215--34

0057 00--1

INPUT PRESSURE OIL PUMP ASSEMBLY REPLACEMENT

0057 00

THIS WORK PACKAGE COVERS:

Removal, Installation

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Adapter, remover (item 2, WP 0088 00)

Puller, mechanical (item 8, WP 0088 00)

Torque wrench (item 22, WP 0088 00)

Torque wrench (item 26, WP 0088 00)

Socket wrench set (item 24, WP 0088 00)

Materials/Parts

Grease (item 4, WP 0085 00)

Nut (item 74, WP 0087 00)

Equipment Conditions

Torque converter removed (WP 0061 00)

REMOVAL

NOTE

If the input pressure pump was previously replaced there will not be a washer under the nut. The

lip (staked) of the nut portion will have to be removed from the pump shaft and the nut discarded.

1. Flatten tabs (1) on washer (2). Remove nut (3) and gear (4) from input pressure pump (5). Discard washer if

present.