TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 291 of 508

TM 9--2520--215--34

INPUT SCAVENGE OIL PUMP ASSEMBLY REPAIR – CONTINUED

0056 00

ASSEMBLY – Continued

2. Install short ends of main drive gear (6) and main idler gear (7) into gear cavities of pump body (8). Align gears.

Shafts must be well seated in needle bearings.

3. Install dowel pins (11) into divider plate (3).

4. Install divider plate (3) over long ends of gear shaft (5). Be sure dowel pins (11) in plate are seated in holes in

pump body (8). Insert key (9) into keyway of main drive gear.

6

3

5

7

5

9

11

8

11

5. Install two pump idler gears (4). Engage keyway of one gear with key.

6. Install pump cover assembly (2). Make sure dowel pins of divider plate are seated in holes of cover. Install two

bolts (1). Torque bolts to 40 to 50 lb--ft (54.2 to 67.8 N

S

m).

4

2

1

4

NOTE

FOLLOW--ON MAINTENANCE:

Install input scavenge oil pump (WP 0055 00)

END OF WORK PACKAGE

0056 00--3/4 blank