TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 385 of 508

TM 9--2520--215--34

0074 00--3

LOW AND REVERSE RANGE PLANETARIES AND RELATED PARTS REPAIR

– CONTINUED

0074 00

DISASSEMBLY – Continued

5. Position low range planetary carrier assembly (8) to support low range ring gear (10). Press low range planetary

carrier assembly (8) until free of reverse range planetary carrier assembly (11). Lift off reverse range carrier

assembly (11) and remove low range planetary carrier assembly (8) from press.

NOTE

Blocks must be placed so that large bronze thrust washer next to bevel gear will not interfere

when reverse range carrier assembly is being pressed out.

6. Position reverse range carrier planetary assembly (11), bevel gear down, in press, and block to support reverse

range ring gear (12). Press reverse range carrier planetary assembly (11) out of ball bearing (13).