TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 392 of 508

TM 9--2520--215--34

0074 00--10

LOW AND REVERSE RANGE PLANETARIES AND RELATED PARTS REPAIR

– CONTINUED

0074 00

ASSEMBLY

WARNING

Use tongs or gloves when handling chilled parts or dry ice to prevent injury.

NOTE

New spindles should be chilled in dry ice for at least one hour before installation.

1. Position reverse range planetary carrier (25), bevel gear down, in press. Install large bronze washer (31).

2. Coat bore of pinion (28) with oil soluble grease. Insert steel tube (32) (item 15, WP 0088 00) into pinion (28) bore.

Install 31 spindle rollers (29) into space between steel tube (32) and pinion (28) bore.

3. Install thrust washer (30) on each side of pinion (28). Retain two thrust washers (30) with oil soluble grease to

make pinion assembly (33).