TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 397 of 508

TM 9--2520--215--34

0074 00--15

LOW AND REVERSE RANGE PLANETARIES AND RELATED PARTS REPAIR

– CONTINUED

0074 00

ASSEMBLY – Continued

16. Position spindle (18), plugged end up, in spindle bore of carrier (28). Align lock ball pocket (35) in spindle with

lock ball pocket in carrier (28).

17. Press spindle (18) into carrier (28), installing lock ball (29) when spindle lock ball pocket nears carrier. Press

spindle into carrier until flush with surface.

NOTE

The low range planetary carrier does not require staking. They are held together with a

retainer.

18. Repeat Steps 13 through 17, above, to assemble and install remaining pinions.

19. Position main bearing support (2), open end of bearing bore up, in press. Coat outer surface of main bearing (9)

with white lead. Press main bearing (9) into bearing support (2) bore. Set main bearing (9) against shoulder in

bearing support (2) bore.